Samsung A23 Test Point (SM-A235) Reboot to 9008 EDL

Description
Reviews

Samsung A23 Test Point (SM-A235) Reboot to 9008 EDL

The Samsung A23 EDL Point is a hardware-specific ISP pinout or test point used to enter the device into the EDL mode (9008) for flashing firmware, unlocking, or repairing. So, if your Samsung Qualcomm phone is bricked, you forget the pattern lock, or you are not able to unlock FRP, then the Samsung A23 (SM-A235) EDL test point will help you to fix it quickly.

What is EDL mode?

EDL mode (Emergency Download Mode) is typically done to establish a connection between a computer & Qualcomm Android phones via the Qualcomm HS-USB QDLoader interface. To boot into the EDL mode, you need to short two test points on the device’s motherboard or use a special tool that has permission from the device’s bootloader.

Nowadays, Qualcomm Android devices come with a locked USB & bootloader. So, it is impossible to boot the device into download mode without authorization. So, you have to use the EDL Point in order to boot into the EDL (Emergency Download Mode).

How to Reboot to EDL Mode 9008 on Samsung A23 (SM-A235):

Here we provide Fastboot, ADB, and Test Point methods to carefully boot your device into EDL mode. So, follow the below methods to successfully reboot your Samsung A23 (SM-A235) to EDL 9008 mode.

Part 1: Samsung A23 Test Point:

Download & extract the Qualcomm USB Driver on your computer.
Install the Qualcomm USB driver on your computer.
Then power off your Qualcomm Android device.
Remove the back cover of the phone.
Now check out the following image.
Find the EDL PinOUT/Test Point on your phone's circuit board.
Now you need a copper wire or tweezer to short that pinout.
Once you’re done, connect your smartphone to the PC using a USB cable.
Done.
Now you can use any unlock or flashing tool for Qualcomm to fix your phone.

Part 2: Fastboot Mode:

- Download & extract the ADB and Fastboot Tool to your PC.
- Make sure to extract the Fastboot file in your C:/ drive.
- Now power off your Samsung Android phone.
- Put it into the bootloader mode.
- Now open the Fastboot folder and type CMD in the directory name.

Part 3: ADB Mode:

Download & extract the ADB and Fastboot Tool to your PC.
Make sure to extract the Fastboot file in your C:/ drive.
Open Device Settings =>> About Device.
Tap Developer Options continuously until you see the Developer options enabled.
Go back to the Settings Menu.
Open Developer Options and enable USB Debugging mode.
Connect your device to your computer.
Open the CMD.
Enter the following command:

Review This!

Rating

Users only can review this file

Review

Date	2025-09-16 13:04:37
Filesize	8.00 MB
Visits	38